A review of research trends on the usage of photocatalysis for wastewater treatment: bibliometric analysis.

Photocatalysis is seen as a viable alternative to treating water pollution, due to its flexibility, low cost, and ability to use visible light which is a plentiful and free energy source. Hence, determining the topics of interest and widening collaboration networks will go a long way in improving research in this field. In this study, we aimed to analyze the global research trends on the usage of photocatalysis for wastewater treatment using bibliometric analysis, centered on the outputs of publications, co-authorships, countries of affiliation, and author's keyword co-occurrences. Bibliometric analysis is a review method that is well-known and more conversant to Social Science. Employing it in Physical Science, which is rarely seen, will provide an avenue and yet another method of determining common research topics as well as the potential opportunities and future research in the field. A potential hybrid review paper of great importance to future research in the area will be produced. A total of 1373 articles published within 27 years between 1993 and 2020 were extracted from the Scopus database. In the beginning, less attention was given to the said topic, because after the oldest article was published in 1993, there was no record of other publications until after 5 years (1998). However, from 2002 there was a growing interest in research in that field, with a cumulative increase every year to date, except for a few years with fewer publications. Meanwhile, the number of publications has risen significantly from 2017 to 2020, with an increase of more than 70 publications every year; this is expected to increase rapidly in the coming years. Recently researchers are focusing on developing efficient photocatalysts for contaminants of emerging concern, like pharmaceutical and refinery wastewater, however, the usage of conducting polymers to produce nanocomposite which was found to be very effective is still lagged in wastewater treatment, as such it will be a good area of future research on effective photocatalysts for wastewater treatment. Supplementary Information: The online version contains supplementary material available at 10.1007/s40899-023-00868-5.

Co-incorporation of graphene oxide/silver nanoparticle into poly-L-lactic acid fibrous: A route toward the development of cytocompatible and antibacterial coating layer on magnesium implants.

Magnesium (Mg) alloys present great potential for the development of orthopedic implants, whereas, their high degradation rate and poor antibacterial performance have restricted orthopedic applications. In this work, PLLA/GO-AgNP (poly-L-lactic acid/graphene oxide- silver nanoparticle) with different concentration of GO-AgNPs were deposited on Mg alloy via electrospinning method for enhancement of corrosion resistance and antibacterial performance. The result revealed that incorporation of GO into PLLA fibrous considerably slowed down the degradation rate of Mg alloy substrate and reduced the H2 release rate from the substrate. Also, co-incorporation of GO and AgNPs into PLLA fibrous resulted in substantial escalate in compressive strength after immersion in simulated body fluid (SBF). Antibacterial activity test exhibited that Mg alloy and neat PLLA fibrous presented minimal inhibition area toward Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In contrast, using PLLA/GO-AgNPs fibrous improved antibacterial performance against both bacteria. Cytocompatibility results indicated that PLLA/GO-AgNPs fibrous with a low amount of GO-AgNPs enhanced cell proliferation and growth while high co-incorporation of GO-AgNPs showed a negative effect on cell proliferation. Taken together, PLLA/1GO-AgNPs fibrous coating shows suitable corrosion resistance, cytocompatibility, and antibacterial function for use in orthopedic applications.

Development of the PVA/CS nanofibers containing silk protein sericin as a wound dressing: In vitro and in vivo assessment.

Skin and soft tissue infections are major concerns with respect to wound repair. Recently, anti-bacterial wound dressings have been emerging as promising candidates to reduce infection, thus accelerating the wound healing process. This paper presents our work to develop and characterize poly(vinyl alcohol) (PVA)/chitosan (CS)/silk sericin (SS)/tetracycline (TCN) porous nanofibers, with diameters varying from 305 to 425 nm, both in vitro and in vivo for potential applications as wound dressings. The fabricated nanofibers possess a considerable capacity to take up water through swelling (~325-650%). Sericin addition leads to increased hydrophilicity and elongation at break while decreasing fiber diameter and mechanical strength. Moreover, fibroblasts (L929) cultured on the nanofibers with low sericin content (PVA/CS/1-2SS) displayed greater proliferation compared to those on nanofibers without sericin (PVA/CS). Nanofibers loaded with high sericin and tetracycline content significantly inhibited the growth of Escherichia coli and Staphylococcus aureus. In vivo examination revealed that PVA/CS/2SS-TCN nanofibers enhance wound healing, re-epithelialization, and collagen deposition compared to traditional gauze and nanofibers without sericin. The results of this study demonstrate that the PVA/CS/2SS-TCN nanofiber creates a promising alternative to traditional wound dressing materials.

Biocompatibility and bioactivity of hardystonite-based nanocomposite scaffold for tissue engineering applications.

Bone injury, especially bone damages due to the removal of bone tumors, is one of the most important issues in the field of therapeutic research in tissue engineering applications. In this context, ceramic-based composites have attracted widespread attention since they have mechanical properties close to the natural bone, hence providing similar conditions for the extracellular matrix (ECM). Thus, in this study, hardystonite and diopside (HT-Di) scaffolds containing various diopside amounts from 5 to 25 wt% were prepared by the space holder method. The results revealed that the fabricated scaffolds contain 70%-75% porosity with a pore size of 300-500 µm and a compressive strength of about 0.54 to 1.71 MPa which is perfectly in the range of the compressive strength of the sponge bone. Noticeably, great apatite formation ability was observed in the scaffold with diopside, although the scaffold without diopside showed poor bioactivity. The MTT assay depicted that the inclusion of diopside into hardystonite scaffold resulted in dramatic enhancement in the MG-63 cell viability. Moreover, the scaffold with diopside offered greater cell attachment and spreading than the scaffold without diopside. Therefore, the synergistic effects of the scaffold with 12.5 wt% of diopside, including great mechanical characteristic, excellent bioactivity, and appealing biocompatibility enable it to be an appealing choice for bone tissue engineering applications.

A novel viewpoint of an imidazole derivative ionic liquid as an additive for cobalt and nickel electrodeposition.

Thin films of Co and Ni electroplated onto a copper electrode from acidic sulfate and Watts baths, respectively, were investigated. The use of an ionic liquid additive in the electrolyte is widespread for producing thin films by electrodeposition. In the present work, the influence of a new ionic liquid, namely, 1-methyl-3-((2-oxo-2-(2,4,5-trifluorophenyl)amino)ethyl)-1H-imidazol-3-ium iodide (Im-IL), in the electrodeposition of two metals was investigated using cathodic polarization (CP), cyclic voltammetry (CV), and anodic linear stripping voltammetry (ALSV) measurements and cathodic current efficiency (CCE%). The surface morphology of the Co- and Ni-coated samples was examined using Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and atomic force microscopy (AFM). The corrosion protection of the Co and Ni samples in a marine environment (3.5% NaCl solution) was studied by the potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The results show that the addition of Im-IL inhibits Co2+ and Ni2+ deposition, which leads to more fine-grained deposits, especially at low Im-IL concentrations. The inhibition of Co2+ and Ni2+ reduction in the presence of Im-IL ions occurs via adsorption, which obeys the Langmuir adsorption isotherm. The CCE% is higher in the presence of Im-IL. SEM images show smoother deposits of Co and Ni in 1 × 10-5 M and 1 × 10-4 M Im-IL solution respectively. The results prove that Im-IL acts as an efficient additive for electroplating soft Co and Ni films.

Adsorption and in vitro release study of curcumin form polyethyleneglycol functionalized multi walled carbon nanotube: kinetic and isotherm study.

Polyethylene glycol functionalized with oxygenated multi-walled carbon nanotubes (O-PEG-MWCNTs) as an efficient nanomaterial for the in vitro adsorption/release of curcumin (CUR) anticancer agent. The synthesized material was morphologically characterized using scanning electron microscopy, Fourier transform infrared spectroscopy and transmission electron microscopy. In addition, the CUR adsorption process was assessed with kinetic and isotherm models fitting well with pseudo-second order and Langmuir isotherms. The results showed that the proposed O-PEG-MWCNTs has a high adsorption capacity for CUR (2.0 × 103 mg/g) based on the Langmuir model. The in vitro release of CUR from O-PEG-MWCNTs was studied in simulating human body fluids with different pHs (ABS pH 5, intestinal fluid pH 6.6 and body fluid pH 7.4). Lastly, to confirm the success compliance of the O-PEG-MWCNT nanocomposite as a drug delivery system, the parameters affecting the CUR release such as temperature and PEG content were investigated. As a result, the proposed nanocomposite could be used as an efficient carrier for CUR delivery with an enhanced prolonged release property. Graphical Abstract ᅟ.